top of page

Frequently Asked Questions - Worktops

Here are the most frequently asked questions about choosing, installing and looking after granite, quartz and Corian worktops, with straightforward answers for anyone.

​

1. What’s the difference between granite, quartz and Corian?
Granite is natural stone, hard and heat-resistant but porous. • Quartz (engineered stone) is 90% crushed quartz bound with resin – very tough, non-porous and low-maintenance. • Corian (solid surface) is acrylic resin plus minerals – seamless joins, repairable and non-porous.

​

2. Which worktop material is most durable?
Quartz and granite both score highly for hardness. Corian is softer but resists stains and can be repaired if scratched.

​

3. Which is easiest to maintain?
All are equal, Quartz and Corian are inherently non-porous so need no sealing. Granite is sealed at the factory so needs no further maintence.

​

4. Are these worktops heat-resistant?
Granite takes high heat well but always use a trivet for hot pans. • Quartz tolerates normal kitchen heat but use a trivet for hot pans. • Corian will scorch under very hot pans – always use a heat mat or trivet..

​

5. Can I place hot pans straight from the hob or oven?
Always use trivets or heat mats on quartz and Corian. Granite can handle more heat but a trivet is still good advised every time.

​

6. Do I need to seal granite worktops?
Modern granites in the uk are sealed at the factory and dont require re-sealing unless in a very high trafic area such as a commercial enviroment.

​

7. How do I clean my worktops daily?
Use warm soapy water (a mild washing-up liquid) and a soft cloth or sponge. Rinse with clean water and dry with a lint-free cloth.

​

8. Can I use bleach to clean them?
Granite: avoid bleach. Use pH-neutral cleaners. • Quartz: avoid bleach and harsh acids. Use gentle soap. • Corian: Use a gentle degreasing (washing-up liquid) soap.

​

9. How do I remove stubborn stains?
Granite: washing-up liquid and water, apply, cover for a few hours, then rinse. • Quartz: use a non-abrasive cleaner and a soft cloth. • Corian: washing-up liquid with soapy water will lift most marks.

​

10. Can I chop directly on my worktop?
No. Always use a chopping board to protect both your knives and the surface.

​

11. Are these surfaces hygienic?
Yes. Quartz and Corian are non-porous so they won’t harbour bacteria. Granite is safe once properly sealed, usually at the factory.

​

12. Will they scratch?
Granite is highly scratch-resistant but not scratch-proof. • Quartz is very tough but can scratch if you drag sharp objects across it. • Corian is softer and can scratch more easily, but light scratches can be buffed out.

​

13. How do I repair a scratch or chip?
Granite/quartz: small chips can be repaired with a specialist resin kit by a professional. • Corian: light scratches and chips can often be very lightly sanded out and buffed by a professional fitter.

​

14. Will heavy items crack the worktop?
All three are very strong if supported correctly. Never stand or sit on the edge.

​

15. What thickness should I choose?
Standard kitchen thickness is 20–30 mm. Thicker worktops (30–40 mm) look grander but cost more.

​

16. What edge profiles are available?•
Square, bevelled, bullnose, waterfall etc. Your choice affects cost and style, talk to your supplier for more details.

​

17. How long does installation take?
Typically 1–2 days on site, depending on size and complexity.

​

18. Do I need a professional fitter?
Yes. Worktops are heavy, need precise cutting, support and waterproof joins.

​

19. Can I cut out a sink or hob myself?
No, leave all template and cutting work to a trained installer.

​

20. How do I keep the shine on granite/quartz?
Wipe spills promptly, use a pH-neutral cleaner. Re-seal granite annually. Quartz holds its gloss without sealing.

​

21. Can these worktops go in a bathroom?
Yes. All three are suitable for wet environments. Corian is popular for seamless basins.

​

22. Are there eco-friendly options?
Quartz: some brands use recycled glass or mirror. Corian offers some recycled content. Granite is natural stone.

​

23. Do they discolour over time?
Properly sealed granite will keep its colour. Quartz and Corian are UV-stable indoors and won’t yellow.

​

24. How do I remove watermarks and limescale?
Wipe regularly. Use a soft cloth and warm water. Rinse thoroughly. For tougher stain always talk to your supplier for brand recommendations.

​

25. What about mould or mildew?
Non-porous surfaces resist mould. Keep joints dry and ventilated. Clean any build-up with soapy water.

​

26. Can I use an abrasive cleaner?
Granite/quartz: avoid abrasives. • Corian: soap and warm water are OK for tough marks, always talk to your brand supplier or brand website for further details.

​

27. Are there colour limits?
Granite: natural patterns and limited colour range. • Quartz: wide colour palette, including bold and uniform tones. • Corian: many solid and translucent shades.

​

28. How do they compare to laminate?
All three are harder wearing, more heat-resistant and longer-lasting than laminate, but the investment is usually more, always ask for a free quote as you may be supprised by a eqivelent price.

​

29. Is there a warranty?
Most suppliers offer warranties on quartz/granite and some with up to up to 10 years on solid surface with limited warranty, always check direct with your supplier or brand website..

​

30. Where can I buy and get them fitted?
Contact your local solid-surface specialist, here at The Kitchen & Worktop Company in Sheffield, South Yorkshire we offer great prices for granite, quartz, ceramics, Corian & solid surfaces.

Also contact us for expert advice, samples, templating and professional installation.

Frequently Asked Questions - Kitchens

Here are the most frequently asked questions about designing, supplying and installing kitchens, with straightforward answers for anyone considering a new kitchen or updating an existing one.

​

1. Do you design kitchens?

Yes. We offer a complete kitchen design service, helping you plan the layout, cabinetry, worktops, appliances and finishing details to create a kitchen that works for your space and the way you use it.

​

2. Do you supply the kitchen as well as design it?

Yes. We can design and supply your kitchen, with the option of professional installation depending on your requirements.

​

3. Do you offer fully fitted kitchens?

Yes. We can provide a complete kitchen service from the initial design through to supply and installation, bringing the different elements together as one project.

​

4. Can I buy a kitchen from you without having it fitted?

Yes. We offer supply-only kitchens for customers who already have their own installer or prefer to arrange installation themselves.

​

5. Can you replace my existing kitchen doors?

Yes. Kitchen door replacement can be a cost-effective way of updating the appearance of an existing kitchen without replacing everything.

​

6. Can you replace my existing worktops?

Yes. We supply and install replacement worktops in a range of materials, including quartz, granite, porcelain and solid surface materials.

​

7. Can I have a new kitchen with a different worktop?

Yes. We can design your kitchen and help you choose a worktop to suit the style, layout and practical requirements of the space.

​

8. What worktops can you supply with my kitchen?

We supply a range of worktop materials including quartz, granite, porcelain, ceramic and acrylic solid surface materials such as Corian® and HIMACS®.

​

9. Do you supply kitchen appliances?

Yes. We can supply appliances as part of your kitchen project, including appliances from brands such as Bosch and NEFF.

​

10. Can you supply sinks and taps?

Yes. Sinks and taps can be incorporated into your kitchen design and supplied as part of your project.

​

11. Can you design a kitchen around my existing appliances?

Yes. Where appropriate, we can design the kitchen around appliances you already have, provided the required dimensions and installation requirements can be accommodated.

​

12. Can you design a kitchen for a small room?

Yes. Kitchen design is not only about the size of the room. Careful planning of the layout, storage and appliances can make good use of smaller spaces.

​

13. Can you design an open-plan kitchen?

Yes. We can design kitchens for open-plan spaces, considering the relationship between the kitchen, dining and living areas.

​

14. Do you offer kitchen design ideas before I commit to an order?

Yes. The design process allows us to discuss your requirements, look at possible layouts and develop the kitchen around your space and preferences before you place your order.

​

15. Do you provide kitchen CAD drawings or visuals?

Yes. Kitchen designs can be developed using CAD visuals to help you understand the proposed layout and appearance of your new kitchen.

​

16. Do you need to measure my kitchen before ordering?

Yes. Accurate measurements are important when designing and ordering a kitchen. Where we are carrying out the installation, the required site measurements and checks form part of the process.

​

17. What do I need to do before my new kitchen is installed?

The room needs to be ready for installation, with suitable access and the necessary services available. Any required building, electrical, plumbing or other preparatory work should be discussed as part of the project.

​

18. Do you carry out plumbing and electrical work?

Kitchen projects can involve several different trades. The exact work required will depend on the project and should be discussed during the design and quotation process.

​

19. How long does a new kitchen take to install?

Installation times vary depending on the size and complexity of the kitchen, the amount of preparation required and the work involved. We will discuss the expected timescale with you as part of your project.

​

20. Can you install the worktops after the kitchen has been fitted?

Yes. Worktops can be templated and fabricated to suit the installed kitchen, depending on the material and project requirements.

​

21. What is templating?

Templating is the process of taking accurate measurements of the installed kitchen before the worktops are fabricated. This allows the worktops to be manufactured to suit the actual dimensions and layout.

​

22. Can I make changes to my kitchen after it has been ordered?

Changes may be possible depending on the stage of your order. Once items have been ordered, manufactured or fabrication has started, changes may result in additional costs or may not be possible.

​

23. Can you work with my existing kitchen layout?

Yes. Depending on the condition and configuration of the existing kitchen, we can look at ways of updating the space, including replacement doors, worktops and other elements.

​

24. Can you help me choose colours and finishes?

Yes. We can help you consider the different kitchen, worktop and finishing options available so that the individual elements work together.

​

25. Do you have kitchen samples available?

Yes. Samples can be used to help you compare colours, finishes and worktop materials when developing your kitchen design.

​

26. Can I visit your showroom?

Yes. Our showroom provides an opportunity to discuss your requirements, view kitchen and worktop options and look at samples.

​

27. Do I need an appointment to visit the showroom?

No appointment is needed on Saturdays. For other times, contacting us beforehand is recommended so we can make sure someone is available to discuss your project.

​

28. Do you offer kitchens for commercial projects?

Yes. We also work on commercial applications and can supply and install worktops and related solutions for commercial environments.

​

29. Where do you supply and install kitchens?

We are based in Sheffield and work across Sheffield and surrounding areas, including Rotherham, Chesterfield, Doncaster, Barnsley, Mansfield and Worksop, as well as further afield depending on the project.

​

30. How do I get a quote for a new kitchen?

The best place to start is to contact us with details of your project. We can discuss your requirements, look at the space and develop a kitchen design and quotation based on what you are looking for.

​

31. Can you help if I only need part of my kitchen updated?

Yes. We can provide individual services such as kitchen door replacement or replacement worktops, rather than requiring you to replace the entire kitchen.

​

32. Can you supply just the kitchen worktops?

Yes. We offer worktop supply and installation separately from our complete kitchen service. This is suitable for customers who already have a kitchen or are arranging their own kitchen installation.

​

33. Can you help me choose the right kitchen?

Yes. The right kitchen depends on your available space, layout, storage requirements, preferred style, budget and how you use the room. We can discuss these requirements as part of the design process.

​

34. Can you design a kitchen to suit my budget?

Yes. We can discuss your requirements and work within the budget available, considering the kitchen, worktops, appliances and other elements required for the project.

​

35. Do you offer a complete kitchen service?

Yes. Our service can bring together kitchen design, kitchen supply, worktops, appliances and installation, providing a complete service from the initial concept through to the finished kitchen.

​

36. How do I get started?

Contact us to discuss your kitchen project. Whether you are looking for a completely new kitchen, replacement doors, new worktops or a complete kitchen design and installation service, we can discuss your requirements and advise you on the next step.

Dekton Rem Porcelain

LET'S CREATE YOUR PERFECT SPACE

Book a design consultation or visit our showroom to discuss your project.

bottom of page